Cisco D9854 Installation And Configuration Manual page 351

Alarm Message
Type
Shutdown Set
Event
System Startup Set
SMI Setup Set
SMI Setup Set
SMI Setup Clear
SMI Setup Clear
Message Cause/Remedy
Watchdog 'AAA' Cause: Possible
has expired software issue.
Remedy: Clear
alarms, reset unit,
notify Cisco
Services if the
problem persists.
System Startup Cause: The unit
has started up and
it indicates an
expected or
unexpected reset.
Remedy: If a
startup was
unexpected, check
for last reset cause.
Notify Cisco
Services if the
problem persists.
Phase lock error Cause: Hardware
on SMI SDRAM Issue.
Remedy: Clear
alarms, reset the
unit, and notify
Cisco Services if
the problem
persists.
SMI SDRAM Cause: Hardware
exhaust test failed Issue.
Remedy: Clear
alarms, reset the
unit, and notify
Cisco Services if
the problem
persists.
SMI SDRAM –
setup successful
SMI SDRAM –
exhaust test
passed
Description Severity
Software Major
detected an
error in
operation.
Indicates that Major
the decoder has
started up. This
alarm will clear
itself after one
second.
SDRAM on Major
SMI bus not
working.
SDRAM on Major
SMI bus not
working.
SDRAM on Major
SMI Bus OK.
SDRAM on Major
SMI Bus OK.
ID
20000
20100
21000
21000
21000
21000
327