Cisco D9854 Installation And Configuration Manual page 363

Alarm Message
Type
Decoder Set
Processor Start
Decoder Set
Processor Start
Decoder Set
Processor Start
Decoder Clear
Processor Start
LEC Timeout Set
LEC Timeout Clear
Message Cause/Remedy
App Transfer Fail Cause: Hardware
issue.
Remedy: Clear
alarms, reset the
unit, and notify
Cisco Services if
the problem
persists.
No Response Cause: Hardware
issue.
Remedy: Clear
alarms, reset the
unit, and notify
Cisco Services if
the problem
persists.
Synchronization Cause: Hardware
Failure issue.
Remedy: Clear
alarms, reset the
unit, and notify
Cisco Services if
the problem
persists.
Boot passed –
LEC Table Cause: Possible
Missing/timeout:c LEC Server or
hannels currently
Uplink issue.
unavailable
Remedy: Check
LEC Server setup
and uplink
configuration for
the GDS PID
setup. Clear alarm
and notify Cisco
Services if the
problem persists.
LEC received –
Description Severity
Transfer of Major
Application
software to
second
processor was
not correctly
completed
Secondary Major
processor not
responding.
Communicatio Major
n with
secondary
processor
failing.
– Major
ECT Table is Major
not received in
the GDS
stream.
– Major
ID
38000
38000
38000
38000
38500
38500
339