Cisco D9854 Installation And Configuration Manual page 344

Chapter 6 Service and Maintenance
Alarm Message
Type
Shutdown Set
Event
Shutdown Set
Event
Shutdown Set
Event
Shutdown Set
Event
320
Message Cause/Remedy
User requested Cause: User
request requires
service restore
reboot or internal
system error.
Remedy: If it is an
internal system
error fault, clear
alarms, reset the
unit, notify Cisco
Services if the
problem persists.
PRODUCTION - Cause: User
request requires
Protect Flash
reboot or internal
system error.
Remedy: If it is an
internal system
error fault, clear
alarms, reset the
unit, notify Cisco
Services if the
problem persists.
I2C Failure Cause: Possible
software/hardwar
e issue.
Remedy: Clear
alarms, reset
unit, notify Cisco
Services if the
problem persists.
WDOG: FPGA not Cause: Possible
software/hardwar
loaded
e issue.
Remedy: Clear
alarms, reset unit,
notify Cisco
Services if the
problem persists.
Description Severity
Restore Major
operation
required restart
Reboot after Major
production
tables
removed.
Internal system Major
error.
FPGA has not Major
been loaded.
ID
20000
20000
20000
20000