Cisco D9854 Installation And Configuration Manual page 332

Chapter 6 Service and Maintenance
Alarm Message
Type
Signal Status Set
Signal Status Set
Signal Status Set
Signal Status Clear
Signal Status Clear
308
Message Cause/Remedy
RF Signal - No Cause: Loss of
ASI/RF lock. Loss
Content
of Transport data.
Invalid frequency
parameters.
External to IRD.
Remedy: Check
tuning parameters
and ASI/RF
cables.
Signal is lost Cause: Loss of
ASI/RF lock. Loss
of Transport data.
Invalid frequency
parameters.
External to IRD.
Remedy: Check
tuning parameters
and ASI/RF
cables.
Tuning Cause: Loss of
Parameters ASI/RF lock. Loss
of Transport data.
Invalid
Invalid frequency
parameters.
External to IRD.
Remedy: Check
tuning parameters
and ASI/RF
cables.
Signal is locked –
Tuning –
Parameters Valid
Description Severity
RF Tuner Minor
locked, but no
TS content.
Loss of signal. Minor
One of the Minor
tuning
parameters is
invalid.
Signal OK Minor
Tuning Minor
parameters are
valid
ID
1000
1000
1000
1000
1000