Cisco D9854 Installation And Configuration Manual page 390

Chapter 6 Service and Maintenance
Warning Message
Type
D/R Invalid L- Set
Band
D/R Invalid L- Clear
Band
D/R Value Out Set
of Range
D/R Value Out Clear
of Range
366
Message Cause/Remedy
Invalid calculated Cause: Calculation of the
L-band frequency L-Band frequency
for Backup (list of cannot be completed
affected D/R based on the existing RF
Backup input and Backup
Transport tuning
Transports)
parameters.
Remedy: Contact your
PNC uplink
administrator to check
the tuning parameters
and RF Input LO
frequencies for the
identified disaster
recovery backup
transports.
cleared –
Tuning Cause: One or more
parameter out of tuning parameter values
range for Backup in one or more of the
(list of affected Backup Transport is
DR Backup outside of the expected
Transports) range.
Remedy: Contact your
PNC uplink
administrator to check
the tuning parameters
and RF Input settings for
identified disaster
recovery backup
transports.
cleared –
Description
The disaster recovery
backup transport
failed tuning
validation due to L-
Band calculation.
The error is cleared
before re-validating
the tuning.
The Disaster Recovery
Table received from
the uplink is invalid.
The error is cleared
before re-validating
tuning.
ID
99350
99350
99360
99360