Cisco D9854 Installation And Configuration Manual page 380

Chapter 6 Service and Maintenance
Warning Message
Type
Memory Usage Set
Host
Memory Usage Clear
Host
Memory Usage Set
Secondary
Memory Usage Clear
Secondary
FPGA Code Set
Version
FPGA Code Clear
Version
356
Message Cause/Remedy
Excessive Cause: Possible software
(stack/partition)
issue.
memory usage
Remedy: Clear
warnings, reset the unit,
and notify Cisco
Services if the problem
persists.
Normal –
(stack/partition)
memory usage
Excessive Cause: Possible software
(stack/partition)
issue.
memory usage
Remedy: Clear
warnings, reset the unit,
and notify Cisco
Services if the problem
persists.
Normal –
(stack/partition)
memory usage
FPGA newer Cause: FPGA version is
than SW, incompatible with the
Supported=AAA,
software.
Running=BBB
Remedy: Select alternate
FPGA, software
versions, reset unit,
notify Cisco Services if
problem persists.
FPGA code ver –
OK
Description
SW exceeding
allowable memory
usage.
–
Software exceeding
allowable memory
usage.
–
FPGA version is
incompatible with
currently operating
software. You may
encounter operational
difficulties
–
ID
78000
78000
79000
79000
80000
80000