Cisco D9858 Installation And Configuration Manual page 254

Chapter 5 Web GUI Setup and Monitoring
b Click OK to confirm. It will reconfigure the device and the next time you log
in, you will be accessing the encrypted version (HTTPS). A untrusted
connection warning message is displayed (first time only). The following is
an example:
c Add the current address as and exception and you can access the D9858 web
GUI.
Note: The HTTPS is displayed in the IP address to denote that it is a secure
access. The following is an example:
2 In the Idle Timeout (seconds) field, enter the number of seconds before the
session for all the enabled protocols will timeout due to inactivity, in a range
from 30 to 1209600 seconds. Enter zero to never timeout.
3 Click Apply.
System Logs
From the Syslog drop-down list, choose the logging protocol to use (Syslog TCP or
Syslog UDP). The Legacy option is used by Cisco customer support only. Select
Disable to disable system logging.
If Syslog TCP or Syslog UDP is selected, set the IP address of the server in the
Syslog Server IP Address field and the server UDP or TCP port number in the
Syslog Server Port field. The address is 12 digits in length (###.###.###.###), in
the range from 0 to 255.
We highly recommend that you use the following syslog servers:
232