Cisco D9858 Installation And Configuration Manual page 270

Chapter 5 Web GUI Setup and Monitoring
Firmware Version
Boot5514/Boot7109
CPLD-5514/CPLD-7109
FP-PIC
FPGA Type
FPGA ID
The HW Board Versions table displays the revisions, option bits, and serial numbers
of the main board (TMB) and the transcoder board (TXB).
In the APP/FPGA Downloads area, click Browse to select the new version of FPGA
or the D9858 Advanced Receiver Transcoder's software application. The Open
dialog opens. Select the upgrade file and click Open. Click Download to download
the selected upgrade file. File formats that can be downloaded include application
CDTs and FPGA CDTs. The State field in the Download Status area displays the
progress of the download. When the download is complete, a Successfully
Completed message is displayed at the top of the Versions page.
Note: For application downloads, once the download is complete, the D9858
transcoder will reboot automatically. For FPGA downloads, you must click Reboot
Receiver in the Service Actions page (Support > Service Actions) to manually
reboot the D9858 transcoder and complete the download. This is to facilitate the
typical case in which the user intends to flash the FPGA file (no auto reboot)
followed by an APP download (auto reboot).
248
Description
Software boot-loader version that initializes and
configures the STi5514/STi7109 device on the TMB
(main) board. This is the master controller for the
D9858 transcoder.
Software Configurable Programmable Logic Device
version attached to the STi5514/STi7109.
Front panel controller version for the D9858
transcoder.
This is the manufacturer's designation for the FPGA
device on the main board.
This is used by the decoder software to determine
what features are available in the FPGA.