Deleting A Program From The Program Entry - Cisco D9858 Installation And Configuration Manual

Chapter 4 Front Panel Operation
The PE (Program Entry) channel is initially displayed.
Note: PE1 is the default.
2 Press the ADV key to select PE1.
PE
PE1 1
RF1
3 Press
Note: The D9858 is available in a single channel (D9858 -1) or a dual channel
configuration. The single channel transcoder (D9858 -1) supports one Program
Entry (PE1) only.
4 Press ADV again to select the channel number.
PE1 1
RF1
5 Directly enter the channel number using the 0 to 9 keys and press SELECT to
apply the channel number, or press

Deleting a Program from the Program Entry

To delete a program from the PE:
1 Press MENU until the startup screen appears.
PE #
PE1 706
RF1
The PE channel is displayed.
Note: PE1 is the default.
2 Press the ADV key to select PE1.
PE
PE1 1
RF1
3 Press the
4 Press ADV again to select the channel number.
5 Enter the channel number 0 with the numeric keys and press SELECT to apply
and delete the program.
42
Channel Name
Freq:12.658 Lvl:-50 Marg:11.6
to scroll through the available program entries.
Ch #
Channel Name
Freq:12.658 Lvl:-50 Marg:11.6
Ch #
Channel Name
Freq:12.658 Lvl:-50 Marg:11.6
Channel Name
Freq:12.658 Lvl:-50 Marg:11.6
to scroll through the available program entries.
s
s
to scroll through the available channels.
s
s