Cisco D9858 Installation And Configuration Manual page 296

Chapter 6 Service and Maintenance
Alarm Message
Type
Trans 2 Flash Set
Fail
Settings Lost Set
Signal Status Set
Signal Status Set
274
Message Cause/Remedy
Contact Customer Cause: FLASH
Service (%s fail at driver operation %s
(one of ERASE,
%d)
WRITE,
BLANK_CHECK
or READ_WRITE)
failed on the
Transcoder 2 (Sat2)
FLASH offset %d.
Remedy: Contact
Cisco Services.
Stored Cause: Corrupted
configuration database record
incomplete. was found while
Contact Customer populating the
Service. DBR partition.
Remedy: Contact
Cisco Services.
ASI Signal - No Cause: Loss of
ASI/RF lock. Loss
Content
of Transport data.
Invalid frequency
parameters.
External to IRD.
Remedy: Check
tuning parameters
and ASI/RF cables.
RF Signal - No Cause: Loss of
ASI/RF lock. Loss
Content
of Transport data.
Invalid frequency
parameters.
External to IRD.
Remedy: Check
tuning parameters
and ASI/RF cables.
Description Severity
The FLASH Major
device
hardware
failed.
The settings Major
database
detects
corruption.
ASI Link Minor
Locked, but
no TS content.
RF Tuner Minor
locked, but no
TS content.
ID
940
950
1000
1000