Cisco D9858 Installation And Configuration Manual page 132

Chapter 4 Front Panel Operation
Transcode
Menu Item
PE
Video Mode
HD HRes
SD HRes
HD/SD B/R Mode
110
Description
This selects the transcoder
index as referenced by DPM.
This selects the transcode
channel video mode.
This selects the transcode
channel HD horizontal output
video resolution.
This selects the transcode
channel SD horizontal output
video resolution.
This selects the transcode
channel output bit rate mode.
Parameters
PE1 or PE2
Note: The single channel
transcoder (D9858-1) supports one
Program Entry (PE1) only.
Auto - Leaves the input video
format and resolution unchanged.
For example, SD in - SD out, HD in
- HD out.
SD Output - Down-converts from
HD to SD when receiving an HD
input signal. SD horizontal
resolution will follow the SD Res
parameter set on this menu.
HD Output - Up-converts from SD
to HD1080i when receiving an SD
input signal. HD horizontal
resolution will follow the HD Res
parameter on this menu.
HD720p - Sets the output vertical
resolution to HD720p regardless of
the input resolution.
HD1080i - Sets the output vertical
resolution to HD1080i, regardless
of the input resolution.
Full or 3/4
Setting Description
Input
Resolution
Full 1080i
3/4 1080i
Full 720p
3/4 720p
352, 480, 528, 544, 704, or 720
CBR or VBR
Output
Resolution
1920
1440
1280
960