Cisco D9858 Installation And Configuration Manual page 276

Chapter 5 Web GUI Setup and Monitoring
4 In the FTP Server IP Address field, enter the IP address of the FTP server used to
restore the backup/restore file.
5 In the FTP User Name and FTP Password fields, enter the user name and
password to access the FTP server.
Note: The FTP Password is not retained in the transcoder. You must re-enter the
password before initiating the backup or restore operation.
6 In the FTP Port Number field, enter the port number of the FTP server used to
store the backup/restore file. You can enter a port number in the range from 1 to
65535.
7 Click the Export Device Settings & Transport Network Information radio
button to save user settings and tuning information to the backup file. Click the
Export User Device Settings Only radio button to save user settings to the
backup file.
8 Click Export to save the settings to a backup file. Click Import to retrieve the last
backed up file.
Viewing the Backup/Restore Status
The following table displays the Settings File Backup/Restore/Operation History
information:
Status
Last Backup File Name
Backup Time Stamp
Last Restored File Name
Restore Time Stamp
Operation Status
Detailed Operation Status
Percentage Complete
254
Description
Name of the file to use.
Date and time of the last successful backup file saved.
Name of the last file that was restored.
Date and time of the last successful restore.
Status of the current backup operation (Inprogress, Pass, or
Fail).
Detailed processing step for tracking backup progress.
Percentage of backup function completed.