Cisco D9858 Installation And Configuration Manual page 339

Warning Message
Type
DRT timeout # Set
DRT timeout # Clear
MCT Timeout # Set
MCT Timeout # Set
MCT Timeout # Clear
ECT Timeout # Set
Message Cause/Remedy
DRT # is lost Cause: Uplink is not
sending or is sending
intermittently.
Remedy: Clear warning.
If the problem persists,
determine if uplink is
sending the current SI
information table.
Disable the warning if
not using the table.
DRT fault cleared –
MCT # timed out Cause: Uplink is not
sending or is sending
intermittently.
Remedy: Clear warning.
If the problem persists,
determine if uplink is
sending the current SI
information table.
Disable the warning if
not using the table.
MCT # is lost Cause: Uplink is not
sending or is sending
intermittently.
Remedy: Clear warning.
If the problem persists,
determine if uplink is
sending the current SI
information table.
Disable the warning if
not using the table.
MCT fault –
cleared
ECT # timed out Cause: Uplink is not
sending or is sending
intermittently.
Remedy: Clear warning.
If the problem persists,
determine if uplink is
sending the current SI
information table.
Disable the warning if
not using the table.
Description
No longer receiving
Disaster Recovery
Table.
–
Inband Control Table
was never received.
No longer receiving
Inband Control Table.
–
Event Control Table
was never received.
ID
77000
77000
77100
77100
77100
77200
317