Faxing; Configuring Fax Initial Settings; Setting Your Country; Setting The Printer Id - Dell C1765nf Color Laser User Manual

Faxing

NOTE:
If the Function Enabled setting for
fax function. If the Function Enabled setting for
Enabled" on page 197.
NOTE:
If the
Panel Lock Set

Configuring Fax Initial Settings

NOTE:
The following settings can be configured also using Advance Tools on Easy Setup Navigator.

Setting Your Country

You need to set the country where your printer is used for using the fax service on the printer.
1 Press the (Menu) button.
2 Press the button until System is highlighted, and then press the
3 Press the button until Admin Menu is highlighted, and then press the
4 Press the button until Fax Settings is highlighted, and then press the
5 Press the
button until Country is highlighted, and then press the
6 Press the button to select the country where the printer is used, and then press the
7 Ensure that Are You Sure? is displayed, press the
button.
The printer restarts automatically to apply the settings.
NOTE:
In case of either one, when you configure the country setting, the information, which is registered to the device, is
initialized.

Setting the Printer ID

In most countries, you are required by law to indicate your fax number on any fax you send. The printer ID,
containing your telephone number and name or company name, will be printed at the top of each page sent from
your printer.
1 Press the
(Menu) button.
2 Press the button until System is highlighted, and then press the
3 Press the button until Admin Menu is highlighted, and then press the
4 Press the button until Fax Settings is highlighted, and then press the
5 Press the button until Fax Number is highlighted, and then press the
6 Enter your fax number using the number keypad.
NOTE:
If you make a mistake while entering numbers, press the
7 Press the (Set) button when the number on the display is correct.
8 Press the
button until Fax Header Name is highlighted, and then press the
9 Enter your name or company name using the numeric keypad.
You can enter alphanumeric characters using the numeric keypad, including special symbols by pressing the 1, *,
and # buttons.
is set to
Fax On(Password)
is set to , the fax function is disabled. For details, see "Function
Fax Off
is set to , you need to enter the four digit password to enter the
Enable
button to select Yes, and then press the
, you need to enter the four digit password to use the
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Backspace) button to delete the last digit.
(Set) button.
21
.
Admin Menu
(Set)
267

Faxing