Lighter/Darker
To adjust the contrast to make the copy lighter or darker than the original.
1 Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Loading an Original Document on the ADF" on page 272.
2 Press the
(Copy) button.
3 Press the
button until Lighter/Darker is highlighted, and then press the
4 Press the
or
button to select the desired settings, and then press the
NOTE:
Values marked by an asterisk (
Lighter2
Lighter1
Normal*
Darker1
Darker2
5 Press the
(Start) button to begin copying.
Sharpness
To adjust the sharpness to make the copy sharper or softer than the original.
1 Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
For details about loading a document, see "Loading an Original Document on the ADF" on page 272.
2 Press the
(Copy) button.
3 Press the
button until Sharpness is highlighted, and then press the
4 Press the
button to select the desired settings, and then press the
NOTE:
Values marked by an asterisk (
Sharpest
Sharper
Normal*
Softer
Softest
5 Press the
(Start) button to begin copying.
*
) are the factory default menu settings.
Makes the copy lighter than the original. Works well with dark print.
Works well with standard typed or printed documents.
Makes the copy darker than the original. Works well with light print or faint pencil markings.
*
) are the factory default menu settings.
Makes the copy sharper than the original.
Does not make the copy sharper or softer than the original.
Makes the copy softer than the original.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
Copying
239