Toshiba GR200 Series Instruction Manual page 754

Hide thumbs Also See for GR200 Series:

is not identical to "IED test status".

Note: The function "Event suppression" can detect chattering on BI circuits. (See section

Note: A supervision of the Binary IO module can detect connection errors for BI circuits

Note: The Common control (CMNCTRL) function can test and check the 'On and Off

operations performed by the logic. When the user sets Off for scheme switch

[SCDEN], the operation of the logic is blocked if the logic is running in the same

operation-direction compared with the previous operation-direction (i.e., when on

(off) is performed sequentially). On the other hand, if On is set for the scheme

switch, the logic is not blocked.

Note: The user will need to program the PLC logic "Control hierarchy condition". The

user is also required to connect the logic condition with the select condition logic

using the connection point "DPOS01IN_TMP_28". For more information, see

Control and monitoring application: Control hierarchy

Table 4.8-7.

To identify the input point of the other DPOS, see Table 4.8-7 for PLC#1 and

6F2S1915 (0.46)

. See PLC#3 of

GRZ200 (Soft 031 & 032)