Toshiba GR200 Series Instruction Manual page 929

Setting of AC analog input(Function ID: 200201)
Setting item
VC1 AI1_Ch1_Rating
alpha-numeric AI1_Ch2_Rating
references AI1_Ch3_Rating
AI1_Ch4_Rating
AI1_Ch5_Rating
AI1_Ch6_Rating
AI1_Ch7_Rating
AI1_Ch8_Rating
AI1_Ch9_Rating
AI1_Ch10_Rating
AI1_Ch11_Rating
AI1_Ch12_Rating
AI1_Ch13_Rating
AI1_Ch14_Rating
Note: Channel numbers for rated settings are dependent on VCT type.
1A and 5A are shown above, but neglect them. They are invalid here. Confirm
that all have DEP setting from LCD menu or GR-TIEMS screen.
Example for VCT12B rated current change
(iii)
Figure 5.2-6 shows the setting items and corresponding rating jumpers about VCT12B.
VCT jumper: Close or open the circuits named W* numbers corresponding to the
currents. The hatched areas are required to close or open.
For changing to 5A rated, insert jumpers at W6, 7, 8, 12, 13.
For changing to 1A rated, remove jumper at W6, 7, 8, 12, 13.
U
Range
n
i
1A 5A
t
s
rating rating
DEP / (1A) / (5A) – Rated current at CH#1
DEP / (1A) / (5A) – Rated current at CH#2
DEP / (1A) / (5A) – Rated current at CH#3
DEP / (1A) / (5A) – Rated current at CH#4
DEP / (1A) / (5A) – Rated current at CH#5
DEP / (1A) / (5A) – Rated current at CH#6
DEP / (1A) / (5A) – Rated current at CH#7
DEP / (1A) / (5A) – Rated current at CH#8
DEP / (1A) / (5A) – Rated current at CH#9
DEP / (1A) / (5A) – Rated current at CH#10
DEP / (1A) / (5A) – Rated current at CH#11
DEP / (1A) / (5A) – Rated current at CH#12
DEP / (1A) / (5A) – Rated current at CH#13
DEP / (1A) / (5A) – Rated current at CH#14
- 908 -
Default setting
Contents
1A
rating
GRZ200 (Soft 031 & 032)
6F2S1915 (0.46)
value
Notes
5A
rating
DEP
DEP
DEP
DEP
DEP
DEP
DEP
DEP
DEP
DEP
DEP
DEP
DEP
DEP