Prior Preparations For Installing Bootos And Standard Monitor Os - Mitsubishi Electric GT11 User Manual

16.2 Prior Preparations for Installing BootOS
and Standard Monitor OS
For the installation using GOT, the CF card storing BootOS or Standard monitor OS is required.
For the method of writing BootOS and Standard monitor OS in the CF card, the following two methods are
available.
(1) [To Memory Card] from drawing software
GT Designer2 Version
GT Designer3 Version1 Screen Design Manual (Fundamentals)
(2) Uploading from other GOT (BootOS or Standard monitor OS has been installed)
Chapter 13 FILE DISPLAY AND COPY (PROGRAM/DATA CONTROL)
Precautions on writing BootOS, Standard monitor OS in CF card
Basic Operation/Data Transfer Manual
When writing BootOS, Standard monitor OS, etc. in the CF card, be sure to execute
by the utility of other GOT or drawing software.
The installation is not executed properly with the CF card to which uploaded from
the utility of GOT or copied by softwares other than drawing software.
Note the available capacity of the CF card.
The available capacity of BootOS and Standard monitor OS can be confirmed by [To
Memory Card] of drawing software.

16.2 Prior Preparations for Installing BootOS and Standard Monitor OS

Capacity of data of OS to be transferred
9
10
11
12
13
14
15
16
16 - 3