Control Panel Temperature And Mounting Angle - Mitsubishi Electric GT11 User Manual

6.4 Control Panel Temperature and Mounting Angle

When mounting the main unit to a control panel or similar fixture, set the GOT display section as shown
below.
Horizontal installation
1
When the temperature inside the control panel is 40 to 55 , the mounting angle should be in the range
from 60 to 105 degrees.
• The GOT will have a longer lifetime if used within the mounting angles shown above.
Ideally, the temperature inside the control panel should not exceed 0 to 40
Vertical installation
2
When the temperature inside the control panel is 40 to 50
from 60 to 105 degrees.
• The GOT will have a longer lifetime if used within the mounting angles shown above.
Ideally, the temperature inside the control panel should not exceed 0 to 40 .
6 - 5
6.4 Control Panel Temperature and Mounting Angle
GOT
back panel
GOT
display
section
Control panel,
etc.
GOT
back panel
GOT
display
section
Control panel,
etc.
105°
60°
the mounting angle should be in the range
,
105°
60°