10 - 6
10.1 Communication Setting
10.1.4 Operation of communication setting
Communication driver
(1) Multi-channel function
GT11 can install up to 4 communication drivers.
However, multiple communication drivers cannot be used at the same time.
(Multi-channel function cannot be used.)
(2) Display of communication driver
Communication drivers are displayed in the order of installation.
To change the assigned communication driver to one that is not listed, change the
[Communication Settings] of drawing software and download to the GOT.
The [Channel-Driver assign] screen is
4
displayed again.
Touch the
button.
OK
Touch the
button to return to the
5
[Communication Settings] screen.
Check that the selected communication
6
driver ([A/QnA/QCPU, QJ71C24]) is
assigned.
After checking, touch the
7
Touch the
button. The GOT restarts.
8
button.
OK