14.2.20 Procedure for canceling TC monitor keywords
When the target controller is a QCPU and a password is entered in the sequence program, the keyword
must be canceled to display the set values of times and counters.
The procedure for canceling keywords is described below.
Keyword Release screen
Touch "SET"
When a password is entered in the
sequence program, "KEY WORD
ERR" will be displayed.
Touch "KEY WORD"
(1)
1
2
14.2.20 Procedure for canceling TC monitor keywords
Enter the password entered in the sequence program
at 1).
A-Z
•
key : Touch this key to enter alphabetic
characters A to Z (uppercase).
•
a-z
key : Touch this key to enter alphabetic
characters a to z (lowercase).
0-9
•
key : Touch this key to enter numbers 1 to 9.
•
key : Use this key to delete an entered
Del
character.
•
key : Use this key to delete all characters
AC
under the cursor.
Entry is completed by touching the
keyboard closes.
key, and the
Enter
14 - 37
14.2 System Monitor
9
10
11
12
13
14
15
16