Mitsubishi Electric GT11 User Manual page 191

(4) When the GOT is connected to an FXCPU
Function
Name
Entry Monitoring present values by entering
monitor devices to be monitored in advance
Monitoring the present value of n
Batch monitor
devices from a specified device
Monitoring the present value, set value,
TC monitor contact point, and coil of m devices
from a specified device
Monitoring the present value of x
BM monitor devices in specified buffer memory of a
specified intelligent function module
Setting/Resetting bit devices
Changing the present value of word
Data
devices and buffer memory
change by test
Changing the present value of TC
operation
(possible during TC monitoring)
Changing the set value of TC (possible
during TC monitoring)
Changing device values by performing
Quick test
a quick test
Displaying device comments
Displaying word device and buffer
Display switching
memory values in decimal or
hexadecimal
*1 Set value of T/C and contact coil cannot be monitored.
*2 Set value of T/C, contact coil, and actual value cannot be monitored. Use the TC monitor.
*3 V, Z, and A cannot be monitored, or their present values cannot be changed.
Description Direct CPU connection
( : Available,
Connection type between GOT and controller
GOT multidrop connection
2 3
* *
1 3
* *
3
*
3
*
3
*
3
*
: Partly restricted, : Unavailable)
Reference
Subsection 14.2.10
Subsection 14.2.14
Subsection 14.2.17
Subsection 14.2.21
Subsection 14.2.24
Subsection 14.2.8
Subsection 14.2.7
14.2 System Monitor
14.2.1 Specifications
9
10
11
12
13
14
15
16
14 - 9