Mitsubishi Electric GT11 User Manual page 206

Graphic operation terminal

Hide thumbs Also See for GT11:

Table of Contents

14.2 System Monitor

14.2.8 Quick test operation of monitor devices

(From previous page)

Effective number of digits of device values that can be changed

If an entered value exceeds the corresponding number of digits specified below, the

device value cannot be changed.

[Decimal number]

16-bit (one-word) module : Six digits (including a digit for a sign)

32-bit (two-word) module : Ten digits (including a digit for a sign)

[Hexadecimal number]

16-bit (one-word) module : Four digits

32-bit (two-word) module : Eight digits

The device value of W200

is changed from 43 to 100.

Troubleshooting