Searching Commands And Devices - Mitsubishi Electric GT11 User Manual

14.4.8 Searching commands and devices

Displays a command or device by searching it in sequence program from Step 0.
Command search
1
(1) Operation
MODE
(Read mode)
*1 If the command you want to search for is not on the keyboard, touch the
When searching for an applied instruction, touch the
When searching for a label, touch
( Subsection 14.4.9
*2 Input only when searching for commands requiring a device name and device number.
*3 After the search results are displayed, you can continue searching with the same conditions by touching the
Touching any key other than the
(2) Example
Searching for LD M8000.
MODE
(
LD
Pointer (P, I) searches
*1
Select the command Input the device name and
device number.
to search for.
FNC
P I
or and input the pointer number.
Writing applied instructions)
GO
key ends the search.
< WRITE >
Set the
< READ >
READ mode.
)
Select the command
to search for.
For pointer searches, only labels are searched.
Pointers specified as operands in applied instructions are not searched.
*2
GO
MORE
key to switch to the other keyboard.
key and input the applied instruction number.
Search command
LD
3 MOV
M 8 0
8 LD M 8000
9 OUT T
K 100
12 LD X 002
(Continue to search with the
GO
same conditions)
24 LD M 8000
25 OUT T
K 100
28 OUT T
14.4 MELSEC-FX List Editor
14.4.8 Searching commands and devices
*3
GO
GO key.
12
0 0 GO
10
0
1
14 - 95
9
10
11
12
13
14
15
16