Mitsubishi Electric GT11 User Manual page 145

Clock display
2
Carry out the display and setting of GOT clock data.
When setting the clock data, change the clock data on the GOT and controller regardless of clock
setting.
The setup methods of clock data are shown below.
Key
Input numeric value in cursor position.
0 to 9 Key
Move the cursor.
/ Key
Move the cursor to the left by one character when
Key
Del
month, day, time, minutes, seconds.
Carry out nothing when touched other than when inputting the above.
Close the keyboard after the input time is displayed in clock display.
The update of the clock display does not restart even if the keyboard is closed.
Key
Enter
The update of the clock display restarts with the operation of
Cancel the input time and returns the time of clock display to the time at which the keyboard
was displayed and close the keyboard.
Key
Cancel
The update of the clock display does not restart even if the keyboard is closed.
The update of the clock display restarts with the operation of
If touch the clock display section, the
1
keyboard for input is displayed and the
clock update stops.
Input time with the keyboard by referring to
2
the table below. Input the scheduled time
when the operation of
out since the input time is reflected at the
time of the operation of
The day of the week is displayed
automatically according to the input date.
Contents
Del Key is touched while inputting year,
.
.
12.1 Time Setting and Display
12.1.3 Clock setting operations
9
10
11
is to be carried
.
12
13
14
15
16
12 - 4