Coreos; Installation Method Of Coreos - Mitsubishi Electric GT11 User Manual

Graphic operation terminal
Hide thumbs Also See for GT11:
Table of Contents

Advertisement

16.5 CoreOS

Install CoreOS only if the GOT is not in its factory-shipped condition, even if BootOS is installed.
Normally, installation is not required.
Precautions when installing CoreOS.
If GOT does not recover after CoreOS is installed, there may be a hardware problem.
Please consult your nearest sales office or FA Center.

16.5.1 Installation method of CoreOS

Before installing CoreOS.
1
(1) Installation method
CoreOS can be installed only using the memory card.
The installation via USB, RS-232 or Ethernet is not available.
(2) CF card to be used
CF card of 32MB or more is required.
(3) BootOS
By installing CoreOS, BootOS is also installed with its latest version automatically.
(No operation is required to the user.)
The installation cannot be interrupted.
The followings should not be performed during the installation of CoreOS.
GOT may not operate.
• Turning OFF the GOT power
• Pressing the reset button of GOT
• Turning ON the CF card access switch
• Removing the CF card
If GOT does not operate, please consult your nearest sales office or FA Center.
16.5 CoreOS
16.5.1 Installation method of CoreOS
9
10
11
12
13
14
15
16
16 - 11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Got1000

Table of Contents