Tc Monitor (Monitoring Timers And Counters); Information Displayed On The Tc Monitor Screen And Key Functions - Mitsubishi Electric GT11 User Manual

14.2.17 TC Monitor (Monitoring Timers and Counters)

The TC monitor is a function to monitor only timers (T) and counters (C).
This section describes how to operate the TC monitor when the system monitor function is executed.

14.2.18 Information displayed on the TC Monitor screen and key functions

(1) The information displayed on the TC Monitor screen is described below.
11) Monitor display area
For further information about items 1) to 11) shown above, see the page that follows.
(2) The following table describes the key functions displayed on the TC Monitor screen.
Key switch
TEST
MENU
FORM
SET
14 - 34
14.2 System Monitor
14.2.17 TC Monitor (Monitoring Timers and Counters)
(No comments displayed)
5) Displays a set value.
6) Displays a present value.
7) Displays a device number.
8) Displays a device name.
Activates the Quick test operation.
Subsection 14.2.8 Quick test operation of monitor devices
Switches the screen to the functional change menu screen to activate another monitor function or terminate the
system monitor function.
Subsection 14.2.9 Changing screens (common operation)
Switches the screen to the display format switching screen to change the value display format (DEC/HEX) on the
TC Monitor screen or comment/no-comment display.
Subsection 14.2.7 Switching the display format (DEC/HEX) and comment/no-comment display
Switches the screen to the Device entry screen to enter or test monitor devices.
Entering monitor devices:
Test operation: Subsection 14.2.24 Test operation
Canceling keywords: Subsection 14.2.20 Procedure for canceling TC monitor keywords
Scroll displayed information upward or downward by a line to display the preceding or next monitor device that is
not currently displayed. When five or more monitor devices are entered, these switches are available when their
comments are displayed.
: Scrolls information upward by a line.
: Scrolls information downward by a line.
1) Displays a network No.
2) Displays a station No.
3) Displays a CPU No.
9) Displays a file name.
10) Displays contact point and coil on/off.
Function
Subsection 14.2.5 Entering monitor devices (specifying monitor stations and
devices)
(Comments displayed)
4) Displays a comment.