Mitsubishi Electric GT11 User Manual page 111

(b) GT1155-QTBDQ, GT1155-QSBDQ, GT1150-QLBDQ, GT1155-QTBDA, GT1155-QSBDA,
GT1150-QLBDA
Standard interfaces have the following three types
BUS.........For communication with PLC
RS232 .....For communication with PC (drawing software) and barcode reader, RFID
USB.........For communication with PC (drawing software)
USB interface (Standard interface)
(mini)
(3) Channel number specification menu BOX
0: Set when the communication interface is not used.
1: Set when connecting to PLC or microcomputer. (Only one can be set among arbitrary
communication interfaces.)
8: Set when connecting to a bar code reader, RFID.
9: Set when connecting to PC (drawing software) or modem. (For USB and RS-232 interfaces,
the simultaneous setting is possible. However, when either interface is communicating, the
communication is not allowed for another interface.)
• Setting is not allowed for 2 to 7, *.
• Fixed to 9 for the USB interface.
• Fixed to 1 for the BUS interface.
(4) Driver display BOX
The name of the communication driver for which a channel number is assigned is displayed.
"None" is displayed in the driver display BOX in the following cases :
• The communication driver is not installed. (
• "0" is set in the channel number specification menu BOX.
When setting the channel number to "9", the communication driver "Host (PC)" is automatically
assigned.
When setting the channel number to "9" for the RS-232 interface, the communication driver
[Host(PC)] or [Host(Modem)] can be selected.
When setting the channel number to "9" for the USB interface, the communication driver [Host(PC)]
is automatically assigned.
[GOT front face]
BUS interface (Standard interface)
BUS for connection to QCPU (Q mode)/motion controller CPU (Q series),
or BUS for connection to QnA/ACPU/motion controller CPU (A series)
10.1.3 Description of communication setting screen
[GOT rear face]
RS-232 interface (Standard interface)
Section 13.2 OS Information)
10.1 Communication Setting
9
10
11
12
13
14
15
16
10 - 3