System Alarm Display; System Alarm Display Function; Displaying The System Alarm Display - Mitsubishi Electric GT11 User Manual

14.11 System Alarm Display

14.11.1 System alarm display function

System alarm display is the function to display error code and error message when an error occurs in GOT,
controller or network.
System alarms can be reset on the System alarm display screen.
For details of system alarm, refer to the following manual.

14.11.2 Displaying the system alarm display

14 - 128
14.11 System Alarm Display
14.11.1 System alarm display function
GT Designer2 Version
GT Designer3 Version1 Screen Design Manual (Functions)
Main menu
( 9.3 Utility Display)
Touch [Debug & self
check].
System alarm display
If an error occurs the dialog is displayed at that point,
6
notifying the GOT has terminated abnormally and
which byte the error occurred, and then the GOT
restarts.
If a verification error occurs, the RS-232 interface
hardware may be faulty.
Screen Design Manual
[Debug & self check]
Touch [System alarm
display].
When touching Reset , the
system alarm display on the
GOT is reset.