1. Manuals
  2. Brands
  3. Mitsubishi Electric Manuals
  4. I/O Systems
  5. GT15V-75V4
  6. User manual

Mitsubishi Electric GT15V-75V4 User Manual

Input unit
Hide thumbs Also See for GT15V-75V4:
Table of Contents

Advertisement

Quick Links

Download this manual
MODEL GT15V-75V4R1 Video/RGB Input Unit
MODEL GT15V-75V4 Video Input Unit
MODEL GT15V-75R1 RGB Input Unit
Thank you for purchasing the GOT1000 Series.
Prior to use, please read both this manual and detailed manual
thoroughly to fully understand the product.
User's Manual
MODEL
GT15V-75V4R1-U
MODEL
CODE
IB(NA)-0800348-C(0707)MEE
1D7M54

Advertisement

Table of Contents
loading

Related Manuals for Mitsubishi Electric GT15V-75V4

Summary of Contents for Mitsubishi Electric GT15V-75V4

  • Page 1 MODEL GT15V-75V4R1 Video/RGB Input Unit MODEL GT15V-75V4 Video Input Unit MODEL GT15V-75R1 RGB Input Unit User's Manual Thank you for purchasing the GOT1000 Series. Prior to use, please read both this manual and detailed manual thoroughly to fully understand the product.
  • Page 2 SAFETY PRECAUTIONS (Always read these precautions before using this equipment.) Before using this product, please read this manual and the relevant manuals introduced in this manual carefully and pay full attention to safety to handle the product correctly. The precautions given in this manual are concerned with this product. In this manual, the safety precautions are ranked as "DANGER"...
  • Page 3 [DESIGN PRECAUTIONS] CAUTION Do not bundle the control and communication cables with main-circuit, power or other wiring. Run the above cables separately from such wiring and keep them a minimum of 100mm (3.94in.) apart. Not doing so noise can cause a malfunction. [MOUNTING PRECAUTIONS] DANGER Be sure to shut off all phases of the external power supply used by the system...
  • Page 4 [WIRING PRECAUTIONS] DANGER Be sure to shut off all phases of the external power supply used by the system before wiring. Failure to do so may result in an electric shock, product damage or malfunctions. CAUTION Exercise care to avoid foreign matter such as chips and wire offcuts entering the GOT.
  • Page 5 [STARTUP/MAINTENANCE PRECAUTIONS] DANGER When power is on, do not touch the terminals. Doing so can cause an electric shock or malfunction. Before starting cleaning, always shut off GOT power externally in all phases. Not doing so can cause a unit failure or malfunction. Undertightening can cause a short circuit or malfunction.
  • Page 6 Voltage Directives, Chapter 2, 3, 4 This manual confers no industrial property rights or any rights of any other kind, nor does it confer any patent licenses. Mitsubishi Electric Corporation cannot be held responsible for any problems involving industrial property rights which may occur as a result of using the contents noted in this manual.

  • Page 7: Table Of Contents

    CONTENTS 1. Overview ......................1 2. Specifications ....................4 2.1 Video input unit specifications ..............4 2.2 RGB input unit specifications ..............5 2.3 Video/RGB input unit specifications ............6 2.4 Cable specifications ................. 7 2.4.1 Specifications of the cables (coaxial cables) used when displaying video images ...................
  • Page 8 Packing List The following items are included. Model Product Quantity Video input unit GT15V-75V4 Mounting screw set (2 screws,2 stickers) Extend interface relay board RGB input unit GT15V-75R1 Mounting screw set (2 screws,2 stickers) Extend interface relay board...

  • Page 9: Overview

    1. Overview This User's Manual is related to the following units. • MODEL GT15V-75V4 Video Input Unit (referred to as the Video Input Unit hereinafter) • MODEL GT15V-75R1 RGB Input Unit (referred to as the RGB Input Unit hereinafter) • MODEL GT15V-75V4R1 Video/RGB Input Unit (referred to as the Video/RGB Input Module hereinafter).
  • Page 10 When connecting to a video camera using an RGB output type vision sensor. RGB output type GOT+GT15V-75R1 vision sensor For the video/RGB input unit, functions of both video input unit (GT15V-75V4) and RGB input unit (GT15V-75R1) are available. Video camera GT15V-75V4R1 A 1254 注意...
  • Page 11 *1: When connecting the unit to a personal computer, ground wire of the computer should be grounded. *2: Power on the video camera simultaneously with the GOT. *3: Video images and personal computer screens cannot be displayed on the GOT at the same time. To use the Video input unit, RGB input unit and Video/RGB input unit, make the Communication Settings.

  • Page 12: Specifications

    2. Specifications 2.1 Video input unit specifications Item Specifications Color NTSC format, PAL format (interlaced format) Video input system Monochrome EIA format, CCIR format (interlaced format) Number of video input 4 channel channels Video Input signal IVp-p, 75 , composite signal input section 640x480 (possible to reduce to 320x240, 160x120)

  • Page 13: Rgb Input Unit Specifications

    2.2 RGB input unit specifications Item Specifications RGB input method (dot's) Analog RGB(SVGA; 800x600, VGA; 640x480) Number of video input 1 channel channels Input image signal 1Vp-p, 75 Synchronizing signal TTL, 1k input section 800 600 (refresh rate 60, 72, 75 [Hz]) Display size [dot's] 640 480 (refresh rate 60, 72, 75, 85 [Hz]) RGB external connection...

  • Page 14: Video/Rgb Input Unit Specifications

    2.3 Video/RGB input unit specifications Item Specifications Color NTSC format, PAL format (interlaced format) Video input system Monochrome EIA format, CCIR format (interlaced format) Number of video input 4 channel channels Video input Input signal IVp-p, 75 , composite signal section 640x480 (possible to reduce to 320x240, 160x120) Display size [dot's]...

  • Page 15: Cable Specifications

    2.4 Cable specifications The following shows the cable specifications, connection diagram, and connector used for the video input unit, RGB input unit, and video/RGB input unit. 2.4.1 Specifications of the cables (coaxial cables) used when displaying video images (1) Coaxial cable Use high frequency coaxial cable "3C-2V"...
  • Page 16 (a) Construction of BNC connector and coaxial cable. Parts of the BNC connector Construction of coaxial cable Outer sheath Outer conductor Washer Gasket Insulating material Internal conductive material Plug shell Clamp Contact (b) Connecting the BNC connector with the coaxial cable. 1) Remove the outer sheath of the coaxial cable in the specified 15mm...
  • Page 17 *1: Soldered part must not have excess solder mound. *2: The tail end of the contact must come into close contact with the cut end of the insulating material. The contact must not be cutting in the insulating material. *3: Apply solder quickly so that the insulating material will not be deformed by heat.

  • Page 18: Specifications Of The Cables (9-Core Combined Cables) Used When Displaying Rgb Screens

    2.4.2 Specifications of the cables (9-core combined cables) used when displaying RGB screens (1) Cable specifications Item Specifications Applicable cable Equivalent to SP23-23352A UL20276-SB Applicable wire size 9-core combined cable (recommended) (2) Connection diagram Coaxical Personal computer side GOT side RGND RGND GGND...

  • Page 19: Part Names And External Dimensions

    3. Part Names and External Dimensions 3.1 Part names and external dimensions of the video input unit GOT main unit 133 (5.24) (0.12) (0.10) 17.5 (0.69) (0.71) (0.71) (1.34) Dimensions of X when the video input unit is mounted to the GOT. 12.1”...

  • Page 20: Part Names And External Dimensions Of The Rgb Input Unit

    3.2 Part names and external dimensions of the RGB input unit GOT main unit 133 (5.24) (0.12) (0.10) 113.5 (4.47) Dimensions of X when the RGB input unit is mounted to the GOT. 12.1” 18 (0.71) 10.4” 21 (0.83) Unit: mm (inch) Name Description Connector for RGB...

  • Page 21: Part Names And External Dimensions Of The Video/Rgb Input Unit

    3.3 Part names and external dimensions of the video/RGB input unit GOT main unit 133 (5.24) (0.12) (0.10) 17.5 26.0 (0.69) (0.71) (0.71) (1.34) (1.02) Dimensions of X when the video/RGB input unit is mounted to the GOT. 12.1” 18 (0.71) 10.4”...

  • Page 22: External Dimensions Of The Extension Interface Relay Board

    3.4 External dimensions of the extension interface relay board 64 (2.52) Unit: mm (inch)

  • Page 23: Installation Procedure

    4. Installation Procedure (1) Power off the GOT. (2) Remove two extension unit covers of the GOT. (3) Attach the extend interface relay board to the extend I/F-2 side on the GOT. After the installation, detach the connector cover from the extend interface relay board.
  • Page 24 (7) When installing an extension unit on the unit that has been installed, remove the connector cover and the sticker. When not installing an extension unit on the unit that has been installed, in order to avoid receiving electrostatic, stick accessory stickers to cover the top of mounting screws (4 places).
  • Page 25 MEMO...
  • Page 26 6F No.105 Wu-Kung 3rd.Rd, Wu-Ku Branch Hsiang, Taipei Hsine, Taiwan Gothaer Strasse 8 D-40880 Ratingen, Tel : +886-2-2299-2499 GERMANY Korea Mitsubishi Electric Automation Korea Co., Ltd. Tel : +49-2102-486-0 1480-6, Gayang-dong, Gangseo-ku Mitsubishi Electric Europe B.V. UK Seoul 157-200, Korea Branch Tel : +82-2-3660-9552 Travellers Lane, Hatfield, Hertfordshire.,...

This manual is also suitable for:

Gt15v-75v4r1Got1000 seriesGt15v-75r1

Table of Contents