When Coreos Cannot Be Installed - Mitsubishi Electric GT11 User Manual

16.5.2 When CoreOS cannot be installed

When CoreOS cannot be installed, check the following contents.
When CoreOS cannot be installed even after the following contents are checked, there may be a
hardware problem.
Please consult your nearest sales office or FA Center.
Description
The installation of CoreOS is not executed after the
CF card is inserted to GOT.
The following message is displayed on GOT.
"GOT error. Contact your local sales office."
The following message is displayed on GOT.
"CF card error. Installation will be canceled. Check
whether the CF card can be used."
The following message is displayed on GOT.
Wrong operation system.
The following message is displayed on GOT.
The version of OS is not acceptable to this GOT.
Installation will be canceled.
Confirm the version of OS.
When the installation is completed, the
5
dialogue box shown on the left is displayed.
Check that the message is displayed, and
turn the GOT power OFF.
(When the installation is completed, the
power LED blinks.)
Remove the CF card after turning the
6
power OFF.
If the power is turned on again, the screen
7
shown on the left is displayed.
(The GOT goes into its factory shipped
condition.)
As necessary, install each OS (Standard
monitor OS, communication driver, etc.) or
download a project data.
For the installation method of each OS or
the download method of project data, refer
to the following manual.
GT Designer2 Version
Operation/Data Transfer Manual
GT Designer3 Version1 Screen
Design Manual (Fundamentals)
• Check that the CF card access switch of GOT is ON.
If it is OFF, turn it ON.
• Memory card write from drawing software may not be normally completed.
Execute memory card write from drawing software again.
GOT main unit is breakdown.
Please consult your nearest sales office or FA Center.
CF card is broken.
• Format the CF card and execute the installation again.
• Replace the CF card.
Either the wrong type of GOT was selected for the [Core OS write] setting of the
drawing software, or the data on the CF card are broken.
Make sure that the correct type of GOT is selected, and execute [Core OS write]
again.
Install Core OS from the latest version of drawing software.
16.5.2 When CoreOS cannot be installed
Basic
Action
16.5 CoreOS
9
10
11
12
13
14
15
16
16 - 13