Siemens SIDOOR ATD4 W Series System Manual page 330

Appendices
A.1 Structure of user data/process data
The default values of the parameters p4700, p4701, p4702 correspond to the settings for TZW3,
TZW4, TZW5 in FW versions < V1.09.
Table A-38
Value
0
1
2
3
4
5
6
7
8
9
10
Table A-39
15 - 5
Reserved
Table A-40
Group
D-IN
Table A-41
15 - 3
Reserved
328
Value selection for TZW3, TZW4, TZW5
Description
D-IN
D-OUT
Button
Door position in mm
Door setpoint speed in mm/s
Door actual speed in mm/s
Motor current in mA
Motor current limitation in mA
Voltage of the motor output stage in V
Remaining power capacity of the braking resistor in J
As of V1.12: Operating status display
TZW data structure for value "D-IN"
Bits "D-IN"
Bit Meaning
0 Input 4
1 Input 3
2 Input 2
3 Input 1
4 Input 0
5 - 15 Reserved
Data structure for value "D-OUT"
Format
Data structure see table A-40
Data structure see table A-41
Data structure see table A-43
16-bit unsigned integer
16-bit unsigned integer
16-bit unsigned integer
16-bit signed integer
16-bit signed integer
16-bit unsigned integer
16-bit signed integer
ASCII value of the currently displayed
operating status (see section Operat‐
ing status display (Page 303))
TZW3, TZW4, TZW5
Remarks
X6, INPUT 4
X6, INPUT 3
X6, INPUT 2
X6, INPUT 1
X5, INPUT 0
TZW3, TZW4, TZW5
System Manual, 06/2022, A5E51901827B AA
4 3 2 1
D-IN
2 1
D-OUT
ATD4xxW for industrial applications
0
0