Siemens SIDOOR ATD4 W Series System Manual page 203

Parameter Name
ID
Position block (as of V1.12)
p20061 DCMD_POS_Q69
FBLOCK-REF parameters
The inputs of the various F blocks can be connected or linked to any "Q" outputs (signal sources)
via the following FBLOCK-REF parameters. To this end, the number of the Q element must be
entered directly in the REF parameter (Q{0 to 38}).
Table 5-38 FBLOCK-REF parameters
Parameter ID Name
AND
p20100 REF_AND0_IN1
p20101 REF_AND0_IN2
p20102 REF_AND0_IN3
p20103 REF_AND0_IN4
p20104 REF_AND1_IN1
p20105 REF_AND1_IN2
(As of V1.10)
p20123 REF_AND2_IN1
p20124 REF_AND2_IN2
p20125 REF_AND2_IN3
p20126 REF_AND2_IN4
OR
p20106 REF_OR0_IN1
p20107 REF_OR0_IN2
p20108 REF_OR0_IN3
p20109 REF_OR1_IN1
p20110 REF_OR1_IN2
p20111 REF_OR1_IN3
NOT
p20112 REF_NOT0_IN1
p20113 REF_NOT1_IN1
XOR
p20114 REF_XOR0_IN1
p20115 REF_XOR0_IN2
FRQ
p20116 REF_FRQ0_IN1
p20117 REF_FRQ1_IN1
DELAY
p20118 REF_OnDELAY_IN1
Special
ATD4xxW for industrial applications
System Manual, 06/2022, A5E51901827B AA
Description
Output is active as long as the door position is within the parameterized range.
Description
Input 1 logical AND gate 0
Input 2 logical AND gate 0
Input 3 logical AND gate 0
Input 4 logical AND gate 0
Input 1 logical AND gate 1
Input 2 logical AND gate 1
Input 1 logical AND gate 2
Input 2 logical AND gate 2
Input 3 logical AND gate 2
Input 4 logical AND gate 2
Input 1 logical OR gate 0
Input 2 logical OR gate 0
Input 3 logical OR gate 0
Input 1 logical OR gate 1
Input 2 logical OR gate 1
Input 3 logical OR gate 1
Input logical NOT gate 1 (negation)
Input logical NOT gate 2 (negation)
Input 1 logical exclusive OR (XOR)
Input 2 logical exclusive OR (XOR)
Input frequency detection
Input frequency detection
ON delay
5.9 Operation and configuration of the control unit
Controllers
201