Siemens SIDOOR ATD4 W Series System Manual page 204

Controllers
5.9 Operation and configuration of the control unit
Parameter ID Name
p20119 REF_ACK
p20120 REF_BATTMODE
COUNTER
p20121 REF_COUNTER_IN
p20122 REF_COUNTER_RESET
COLD-STORAGE FUNCTION (as of V1.12)
p20127 REF_CSR_IN_RC
p20129 REF_CSR_IN_PS
p20130 REF_CSR_IN_CLOSE
p20131 REF_CSR_IN_OPRN
Note
After the optimal parameter settings have been determined, they can be noted in the
configuration protocol (see appendix Configuration protocol (Page 339)). These records should
also be kept at hand when asking questions on the Hotline.
202
Description
Fault acknowledgement (preceded by 5 s ON delay)
Emergency power mode (drive order is automatically latched until next end stop
is reached)
Count input of the counter (a positive edge increments the counter)
Reset input of the counter (counter is reset to 0)
Door interlocking input
Input that prevents any movement of the door in the corresponding state (Dee‐
nergize).
Cord-operated switch input
"Partial OPEN" / "CLOSE" pulse until door is either partially opened or closed again.
As of V1.14: After the controller has been switched on or the FBLOCK cooling
storage door unlocked, an opening command is output first.
Close button input
Normal travel "CLOSE" pulse until door is completely closed
Close button input
Normal travel OPEN pulse until the door is completely open.
ATD4xxW for industrial applications
System Manual, 06/2022, A5E51901827B AA