6. If links are created manually, the Create Links window is displayed. The options in this
window are used to link any TX GT to any RX GT. To create links, select the TX GT and RX
GT from the two lists, then click the Add Link button. For this project, connect the
following links
Lane0/TX to Lane0/RX
°
Lane1/TX to Lane1/RX
°
Lane2/TX to Lane2/RX
°
Lane3/TX to Lane3/RX
°
Lane4/TX to Lane4/RX
°
Lane5/TX to Lane5/RX
°
Lane6/TX to Lane6/RX
°
Lane7/TX to Lane7/RX
°
X-Ref Target - Figure 1-32
VC7222 IBERT Getting Started Guide
UG971 (Vivado Design Suite v2015.1) April 27, 2015
(Figure
1-32):
Figure 1-32: Create Links Window
www.xilinx.com
Chapter 1: VC7222 IBERT Getting Started Guide
41
Send Feedback