Xilinx Virtex-7 FPGA VC7222 Getting Started Manual page 12

Attach the GTH Quad Connector
Before connecting the BullsEye cable assembly to the board, firmly secure the blue
elastomer seal provided with the cable assembly to the bottom of the connector housing, if
it is not already inserted (see
Figure 1-4
Note:
X-Ref Target - Figure 1-4
VC7222 IBERT Getting Started Guide
UG971 (Vivado Design Suite v2015.1) April 27, 2015
Figure 1-4).
is for reference only and might not reflect the current version of the connector.
Figure 1-4: BullsEye Connector with Elastomer Seal
www.xilinx.com
Chapter 1: VC7222 IBERT Getting Started Guide
12
Send Feedback