Xilinx Virtex-7 FPGA VC7222 Getting Started Manual page 19

5. In the Select Hardware Target window, the xilinx_tcf cable appears under
Hardware Targets, and the JTAG chain contents of the selected cable appear under
Hardware Devices
Frequency at the default value (15 MHz). Click Next.
X-Ref Target - Figure 1-12
6. In the Open Hardware Target Summary window, click Finish. The wizard closes and the
Vivado Design Suite opens the hardware target.
VC7222 IBERT Getting Started Guide
UG971 (Vivado Design Suite v2015.1) April 27, 2015
(Figure 1-12). Select the xilinx_tcf target and keep the JTAG Clock
Figure 1-12: Select Hardware Target
www.xilinx.com
Chapter 1: VC7222 IBERT Getting Started Guide
19
Send Feedback