Xilinx Virtex-7 FPGA VC7222 Getting Started Manual page 21

2. In the Hardware window, right-click XC7VH580T_1 and select Refresh Device
(Figure 1-14).
If the FPGA was not programmed using the SD card, provide both the programming and
Note:
the probes files, and then select
X-Ref Target - Figure 1-14
VC7222 IBERT Getting Started Guide
UG971 (Vivado Design Suite v2015.1) April 27, 2015
Chapter 1: VC7222 IBERT Getting Started Guide
Program Device
Figure 1-14: Program/Refresh Device
www.xilinx.com
.
Send Feedback
21