Setting Communications Parameters (Snmp Protocol) - Huawei NetCol5000-A050 User Manual

NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual
Parameter
NMS port
number
----End

6.5.4.3 Setting Communications Parameters (SNMP Protocol)

Context
●
●
●
●
Procedure
Step 1 On the home screen, choose Settings > Comm Settings > SNMP Settings.
6-20
Figure 6-20 Setting SNMP communications parameters
Step 2 Set SNMP Version based on site requirements, and then tap Submit.
●
●
Step 3 Set Read Community and Write Community.
1.
Issue 08 (2021-09-17)
Setting
-
To set communications parameters, log in as the admin user.
This section is suitable only for SNMP. Skip this section if you use Modbus.
Record the values entered in this section. They will be used when you access a
smart cooling product to an EMS (element management system).
One smart cooling product supports concurrent access of up to 6 EMSs
through SNMP.
is displayed.
If you set SNMP Version to ALL or SNMPv1&v2c, you can set Read
Community and Write Community by performing
If you set SNMP Version to ALL or SNMPv3, you can add SNMPv3 users by
performing Step 4.
Tap the text box after Read Community, as shown in
Community as planned, tap
Copyright © Huawei Technologies Co., Ltd.
Setting Method
If you need to change the value, enter a value as
required. This parameter is configurable when Link
mode is set to Client.
, and then tap Submit.
6 Power-On Commissioning
Figure
Step 3.
Figure 6-21. Set Read
154