Huawei NetCol5000-A050 User Manual page 142

NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual
Menu
Issue 08 (2021-09-17)
Parameter
Liquid pipe
length
Height
difference
between
indoor and
outdoor units
Heating
function
Heating mode
Copyright © Huawei Technologies Co., Ltd.
6 Power-On Commissioning
Description
Set this parameter
based on the actual
length of the liquid
pipe.
Set this parameter
based on the actual
height difference
between indoor and
outdoor units.
If this parameter is set
to Enable, the device
starts heating when
the ambient
temperature is lower
than the temperature
setpoint by a certain
range. If this
parameter is set to
Disable, the heating
function is disabled. If
this parameter is set to
Enabled when active
power, the device
starts heating only
when the primary
power is used and the
ambient temperature is
lower than the
temperature setpoint
by a certain range.
This parameter can be
set to Dehumidifying
heating, Low-
temperature heating,
or Dehumidification &
Low temperature
heating.
Setting Guide
-
-
Retain the default
value.
Retain the default
value.
132