Webui Introduction; Logging In To The Webui - Huawei NetCol5000-A050 User Manual

NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual

7.1 Logging In to the WebUI

Prerequisites
●
●
Procedure
Step 1 Connect a network cable between the network port on the PC and the FE port on
the smart cooling product.
Step 2 On the home screen, choose Settings > Comm Settings > IP Settings. Change IP
assigning mode to Manual, and set the IP address, subnet mask and default
gateway.
Step 3 Configure the PC IP address and the smart cooling product IP address in the same
network segment.
If the smart cooling product IP address is 192.168.0.10, subnet mask is
255.255.255.0, and default gateway is 192.168.0.1, set the PC IP address to
192.168.0.11, subnet mask to 255.255.255.0, and default gateway to 192.168.0.1.
Step 4 Set LAN parameters.
1.
2.
Issue 08 (2021-09-17)
Operating system: Windows 7 or later
Browser: Chrome, Firefox, Internet Explorer 9 or later The following uses
Internet Explorer as an example.
NO TE
● If the smart cooling product connects to a LAN and a proxy server has been selected,
perform Step 4.3 and
● If the smart cooling product connects to the Internet, and the PC in a LAN accesses the
Internet over a proxy server, do not perform
fail to access the WebUI.
Open the Internet Explorer and choose Tools > Internet Options.
Click the Advanced tab and select Use TLS1.1 and Use TLS1.2.
Copyright © Huawei Technologies Co., Ltd.
7

WebUI Introduction

Step 4.4.
Step 4.3
7 WebUI Introduction
and Step 4.4. Otherwise, you will
168