Huawei NetCol5000-A050 User Manual page 100

NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual
Ensure that the rubber ring is not disconnected. If the rubber ring is disconnected
or damaged, seal the gaps around the pipes with mastic cement or thermal
insulation foam.
Step 3 Connect the gas and liquid pipes to the gas and liquid pipes of the outdoor unit
respectively.
----End
Top Pipe Routing
When routing pipes from the top, do not route the pipes over servers or other
devices to prevent them from being affected by pipe leakage.
Step 1 Remove the plugs from the top refrigerant pipe using a welding torch.
Figure 4-64 Top pipe routing
(1) Gas pipe
Step 2 Connect the gas and liquid pipes to the gas and liquid pipes of the outdoor unit
respectively. Pipes should be wrapped with thermal insulation foam.
----End
Issue 08 (2021-09-17)
NO TICE
NO TICE
Copyright © Huawei Technologies Co., Ltd.
(2) Liquid pipe
4 Installation
90