Installing Optional Rear Copper Bar Protection Components - Huawei UPS5000-H User Manual
400 kva-800 kva. 100 kva power modules
Hide thumbs
Also See for UPS5000-H:
- User manual (395 pages) ,
- Quick manual (8 pages) ,
- User manual (115 pages)
Table of Contents
Advertisement
UPS5000-H-(400 kVA-800 kVA)
User Manual (100 kVA Power Modules)
Figure 6-101 Installing an ambient T/H sensor
Step 3 Connect the RJ11 port on the ambient T/H sensor to the COM1 port on the
monitoring interface card.
Figure 6-102 Connecting cables
(1) Cascaded with other T/H sensors
----End
6.7 Installing Optional Rear Copper Bar Protection
Components
Prerequisites
If optional rear copper bar protection components are configured, perform the
following steps to install them.
Procedure
Step 1 Remove the UPS rear door panels.
Step 2 Install copper bar protection components.
Issue 03 (2021-08-03)
Copyright © Huawei Technologies Co., Ltd.
6 Installation
140
Advertisement
Table of Contents
