UPS5000-H-(400 kVA-800 kVA)
User Manual (100 kVA Power Modules)
Figure 6-99 Conceptual diagram of a dual-bus parallel system
----End
6.6 Installing an Ambient T/H Sensor
Context
If an ambient T/H sensor is configured, perform the following steps to install it.
Procedure
Step 1 Secure the fastener of the ambient T/H sensor to the wall or ceiling near the UPS.
Figure 6-100 Securing the fastener
Step 2 Install the T/H sensor on the fastener.
Issue 03 (2021-08-03)
Copyright © Huawei Technologies Co., Ltd.
6 Installation
139