Installing Cables; Installing The Ups + Bottom Cabling Cabinet + Top Outlet Kit; Installing Cabinets - Huawei UPS5000-H User Manual

UPS5000-H-(400 kVA-800 kVA)
User Manual (100 kVA Power Modules)

6.3.3.2 Installing Cables

Procedure
Step 1 Install cables. For details, see
----End
6.3.4 Installing the UPS + Bottom Cabling Cabinet + Top
Outlet Kit
●
●

6.3.4.1 Installing Cabinets

Installation on the Floor
Ensure that the installation floor is level.
Step 1 Determine the cabinet installation positions on the floor based on the holes in the
marking-off template for floor installation.
Issue 03 (2021-08-03)
If both the bottom cabling cabinet and the top outlet kit are configured,
cabinets can be installed against a wall and cables can be routed from the
bottom.
The following procedure applies to installation against a wall. If cabinets are
not installed against a wall and there is operation space at the rear of the
cabinets, you need to install the cabinet combination screws at the rear and
the anchor screws at the bottom.
NO TICE
NO TE
● A: mounting holes on the channel steel
● B: mounting holes on the floor
Copyright © Huawei Technologies Co., Ltd.
6.3.1.2 Installing Cables.
6 Installation
102