GE AF-650 GP Programming Manual page 28

Parameter Descriptions
K-12 This Set-up Linked to
Option: Function:
synchronized (or linked). Synchronization can be
performed in 2 ways:
1. Change the edit set-up to [2] Set-up 2 in
parameter K-11 Edit Set-up and set
parameter K-12 This Set-up Linked to to [1] Set-up
1. This starts the linking (synchronizing) process.
Illustration 3.2 Set-up 1
OR
2. While still in set-up 1, copy set-up 1 to set-up
2. Then set parameter K-12 This Set-up Linked to
to [2] Set-up 2. This starts the linking process.
Illustration 3.3 Set-up 2
When completed, parameter K-13 Readout:
Linked Set-ups reads {1,2} to indicate that all not
changeable during operation parameters are now
the same in set-up 1 and set-up 2. If there are
changes to a not changeable during operation
parameter, for example parameter P-30 Stator
Resistance (Rs), in set-up 2, they are also
changed automatically in set-up 1. A switch
between set-up 1 and set-up 2 during
operation is now possible.
[0] Not linked
*
[1] Set-up 1
[2] Set-up 2
[3] Set-up 3
[4] Set-up 4
DET-618D
AF-650 GP™ Programming Guide
K-13 Readout: Linked Set-ups
Array [5]
Range:
0 [0 -
*
255]
K-14 Readout: Edit Set-ups / Channel
Range:
0 [-2147483648 -
*
2147483647]
K-15 Readout: Actual Set-up
Range:
0 [0 - 255] Makes it possible to read out the active set-up,
*
02/2016 All rights reserved.
Function:
View a list of all the set-ups linked by
parameter K-12 This Set-up Linked to. The parameter
has 1 index for each parameter set-up. The value
for each index shows which set-ups are linked to
that parameter set-up.
Index Keypad value
0 {0}
1 {1,2}
2 {1,2}
3 {3}
4 {4}
Table 3.3 Set-up Link Example
Function:
View the setting of parameter K-11 Edit Set-
up for each of the 4 different
communication channels. When the
number is displayed as a hex number, as it
is in the keypad, each number represents 1
channel.
Numbers 1–4 represent a set-up number; F
means factory setting; and A means active
set-up. The channels are, from right to left:
keypad, Drive bus, USB, HPFB1-5.
Example: The number AAAAAA21h means
the following:
•
The frequency converter received
the setting set-up 2 via a fieldbus
channel. This selection is reflected
in parameter K-11 Edit Set-up.
•
A user selected set-up 1 via the
keypad.
•
All other channels are using the
active set-up.
Function:
also when [9] Multi set-up is selected in
parameter K-10 Active Set-up.
3 3
27