Main Menu Mode; Parameter Selection; Changing Data; Changing A Text Value - GE AF-650 GP Programming Manual

How to Program

2.1.8 Main Menu Mode

2 2
Press [Main Menu] to enter the main menu mode. The
readout in Illustration 2.14 appears on the display.
The middle and bottom sections in the display show a list
of parameter groups, which can be selected by toggling
▲ ▼
the [ ] and [
Illustration 2.14 Main Menu Mode
Each parameter has a name and number which remain the
same regardless of the programming mode. In the main
menu mode, the parameters are divided into groups. The
first digit of the parameter number (from the left) indicates
the parameter group number.
All parameters can be changed in the Main Menu.
However, depending on the choice of configuration
(parameter H-40 Configuration Mode), some parameters can
be hidden. For example, open loop hides all the PID
parameters, and other enabled options make more
parameter groups visible.

2.1.9 Parameter Selection

In the main menu mode, the parameters are divided into
groups. Select a parameter group with the navigation keys.
After selecting a parameter group, select a parameter with
the navigation keys.
The middle section on the display shows the parameter
number and name, and the selected parameter value.
20
] keys.
Illustration 2.15 Parameter Selection

2.1.10 Changing Data

The procedure for changing data is the same in the quick
menu mode and the main menu mode. Press [OK] to
change the selected parameter.
The procedure for changing data depends on whether the
selected parameter represents a numeric data value or a
text value.

2.1.11 Changing a Text Value

If the selected parameter is a text value, change the text
value with the [
Place the cursor on the value to save and press [OK].
Illustration 2.16 Changing a Text Value
02/2016 All rights reserved.
▲ ▼
] [ ] keys.
DET-618D