GE AF-650 GP Programming Manual page 105

Parameter Descriptions
O-43 PCD Read Configuration
Range:
[1238] Logic Controller State
[1239] Control Card Temp.
[1245] Motor Phase U Current
3 3
[1246] Motor Phase V Current
[1247] Motor Phase W Current
[1248] Speed Ref. After Ramp [RPM]
[1250] External Reference
[1251] Pulse Reference
[1252] Feedback[Unit]
[1253] Digi Pot Reference
[1257] Feedback [RPM]
[1260] Digital Input
[1261] Terminal 53 Switch Setting
[1262] Analog Input 53
[1263] Terminal 54 Switch Setting
[1264] Analog Input 54
[1265] Analog Output 42 [mA]
[1266] Digital Output [bin]
[1267] Freq. Input #29 [Hz]
[1268] Freq. Input #33 [Hz]
[1269] Pulse Output #27 [Hz]
[1270] Pulse Output #29 [Hz]
[1271] Relay Output [bin]
[1272] Counter A
[1273] Counter B
[1274] Prec. Stop Counter
[1275] Analog In X30/11
[1276] Analog In X30/12
[1277] Analog Out X30/8 [mA]
[1284] Comm. Option STW
[1285] Drive Port CTW 1
[1287] Bus Readout Alarm/Warning
[1289] Configurable Alarm/Warning Word
[1290] Alarm Word
[1291] Alarm Word 2
[1292] Warning Word
[1293] Warning Word 2
[1294] Ext. Status Word
[1295] Ext. Status Word 2
[1340] Analog Input X49/1
[1341] Analog Input X49/3
[1342] Analog Input X49/5
[1343] Analog Out X49/7
[1344] Analog Out X49/9
[1345] Analog Out X49/11
[1346] X49 Digital Output [bin]
[1500] Operating hours
[1501] Running Hours
[1502] kWh Counter
104
3.10.5 O-5# Digital/Bus
Function:
Parameters to configure the control word Digital/Bus
merging.
O-50 Coasting Select
Option:
[0] Digital
input
[1] Bus
[2] Logic AND Activates Coast command via the network/serial
[3] Logic OR
*
O-51 Quick Stop Select
Select control of the quick stop function via the terminals (digital
input) and/or via the network.
Option:
[0]
[1]
[2]
[3]
*
O-52 DC Brake Select
Option:
[0] Digital
input
[1] Bus
[2] Logic
AND
[3] Logic OR Activates a DC Brake command via the network/
*
O-53 Start Select
Option:
02/2016 All rights reserved.
Function:
Select control of the coasting function via the
terminals (digital input) and/or via the network.
Activates Coast command via a digital input.
Activates Coast command via the serial
communication port or network option module.
communication port and 1 extra digital input.
Activates Coast command via the network/serial
communication port or via 1 of the digital
inputs.
Function:
Digital input
Bus
Logic AND
Logic OR
Function:
Select control of the DC brake via the terminals
(digital input) and/or via the fieldbus.
NOTICE
When parameter P-20 Motor Construction is
set to [1] PM non-salient SPM, only
selection [0] Digital input is available.
Activates a DC Brake command via a digital
input.
Activates a DC Brake command via the serial
communication port or network option module.
Activates a DC Brake command via the network/
serial communication port, and also via 1 of the
digital inputs.
serial communication port, or via 1 of the digital
inputs.
Function:
Select control of the frequency converter start
function via the terminals (digital input) and/or
via the network.
DET-618D