GE AF-650 GP Programming Manual page 142

Parameter Descriptions
LC-15 RS-FF Operand S
Option:
[34] Digital input DI19
[35] Digital input DI27
[36] Digital input DI29
[37] Digital input DI32
[38] Digital input DI33
[39] Start command
[40] Drive stopped
[41] Reset Trip
[42] Auto-reset Trip
[43] Ok key
[44] Reset key
[45] Left key
[46] Right key
[47] Up key
[48] Down key
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
[70] Logic Controller Time-out 3
[71] Logic Controller Time-out 4
[72] Logic Controller Time-out 5
[73] Logic Controller Time-out 6
[74] Logic Controller Time-out 7
[75] Start command given
[76] Digital input x30 2
[77] Digital input x30 3
[78] Digital input x30 4
[90] ATEX OL cur. warning
[91] ATEX OL cur. alarm
[92] ATEX OL freq. warning
[93] ATEX OL freq. alarm
[94] RS Flipflop 0
[95] RS Flipflop 1
[96] RS Flipflop 2
[97] RS Flipflop 3
[98] RS Flipflop 4
[99] RS Flipflop 5
[100] RS Flipflop 6
[101] RS Flipflop 7
[102] Relay 1
[103] Relay 2
[108] Relay 7
DET-618D
AF-650 GP™ Programming Guide
Function:
[OK] is pressed. Only available
on the graphical LCP.
[Reset] is pressed. Only
available on the graphical LCP.
[◄] is pressed. Only available
on the graphical LCP.
[►] is pressed. Only available
on the graphical LCP.
▲
[ ] is pressed. Only available
on the graphical LCP.
▼
[ ] is pressed. Only available
on the graphical LCP.
X34/Relay Option OPCRLY.
02/2016 All rights reserved.
LC-15 RS-FF Operand S
Option:
[109] Relay 8
[110] Relay 9
LC-16 RS-FF Operand R
Option:
[0] False
*
[1] True
[2] Running
[3] In range
[4] On reference
[5] Torque limit
[6] Current Limit
[7] Out of current range
[8] Below I low
[9] Above I high
[10] Out of speed range
[11] Below speed low
[12] Above speed high
[13] Out of feedb. range
[14] Below feedb. low
[15] Above feedb. high
[16] Thermal warning
[17] Line voltage out of range
[18] Reversing
[19] Warning
[20] Alarm (trip)
[21] Alarm (trip lock)
[22] Comparator 0
[23] Comparator 1
[24] Comparator 2
[25] Comparator 3
[26] Logic rule 0
[27] Logic rule 1
[28] Logic rule 2
[29] Logic rule 3
[30] Logic Controller Time-out 0
[31] Logic Controller Time-out 1
[32] Logic Controller Time-out 2
[33] Digital input DI18
[34] Digital input DI19
[35] Digital input DI27
[36] Digital input DI29
[37] Digital input DI32
[38] Digital input DI33
[39] Start command
[40] Drive stopped
[41] Reset Trip
[42] Auto-reset Trip
[43] Ok key
Function:
X34/Relay Option OPCRLY.
X34/Relay Option OPCRLY.
Function:
[OK] is pressed. Only available
on the graphical LCP.
141
3 3