Removing A Module's Terminal Board - GE 90-30 PLC Series Installation And Hardware Manual

2

Removing a Module's Terminal Board

To remove a terminal board:
Figure 2-5. Removing a Module's Terminal Board
2-6 Series 90-30 PLC Installation and Hardware Manual – August 2002
Open the plastic terminal board cover.
Push up on the jacking lever to release the terminal block.
JACKING
LEVER
Grasp pull-tab and pull it towards you until contacts have separated from module
housing and bottom pivot hook has disengaged.
PULL
TAB
a43715
GFK-0356Q